- 606 - sb801 thru SB807 single phase 8.0 amps. silicon bridge rectifiers voltage range 50 to 1000 volts current 8.0 amperes features ul recognized file # e-96005 surge overload rating 250 amperes peak low forward voltage drop high temperature soldering guaranteed: 260 / 10 seconds / 0.375? ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension small size, simple installation leads solderable per mil-std-202 method 208 sb-10 dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol sb 801 sb 802 sb 803 sb 804 sb 805 sb 806 sb 807 units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum avera g e forward rectified current @t a = 50 i (av) 8.0 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 250 a maximum instantaneous forward voltage @ 4.0a v f 1.0 v maximum dc reverse current @ t a =25 at rated dc blocking voltage @ t a =100 i r 10 500 ua ua typical thermal resistance (note) r jc 6 operating temperature range t j -55 to +125 storage temperature range t stg -55 to +150 note: thermal resistance from junction to case.
- 607 - ratings and characteristic curves (sb801 thru SB807) fig.4- typical reverse characteristics per bridge element instantaneous reverse current .( a) 0 20 40 60 80 100 120 140 .01 0.1 10 100 percent of rated peak reverse voltage. (%) tj=100 c 0 tj=25 c 0 fig.2- maximum forward current derating curve average for ward current . (a) 0 50 100 150 0 2 4 6 10 8 ambient temperature. ( c) o fig.1- maximum non-repetitive forward surge current per bridge element peak for ward surge current . (a) 10 2 4 6 8 1 80 50 60 20 100 150 50 0 100 200 250 number of cycles at 60hz fig.3- typical instantaneous forward characteristics per bridge element instantaneous for ward current . (a) .6 .8 1.0 1.2 1.4 1.6 2.0 1.8 0.1 0.01 1.0 10 100 instantaneous forward voltage. (v) tj=25 c pulse width-300 s 1% duty cycle 0
|
